PCA-10 capacitor charging power supply is developed for the use in pumping systems of flashlamp-pumped solid-state laser devices.
The maximal output power of the power supply is 1000 W, so it is the best for use in laser systems of medium power. In other respects PCA-10 is a 'clone' of its 'big brother' PCA-20 capacitor charger.
Like PCA-20, PCA-10 is a medical capacitor charging power suitable for use in medical laser equipment. All the device parameters meet the latest versions of medical standards requirements: IEC 60601-1 for electrical safety, IEC 61000-3-2 for active power factor correction (PFC) and EN 55011 / CISPR 11 Class A safety requirements for EMI and leakage current.
So the power supply can be used in different kinds of medical devices without any additional filtration or additional means of protection.
Output:
Maximal output power
1000 W
Maximal output voltage
300/500/700/1000/1500 V standard modifications
up to 2000 V on request
Modifications
partial discharge modification,
complete discharge modification
Voltage regulation
< 0.5%
Safety:
PFC coefficient
> 0.98 (active)
Main safety standard
IEC 60601-1
Isolation
4000 VAC (2x MOPP)
Protections
HV arc to ground during operation
Turn on with open circuit
Turn on with short circuit
Shut down on over-temperature
over-voltage and open interlock
Environment:
Cooling
forced air (with built-in fan)
Operation temperature
+10 °C to +40 °C
Storage temperature
-20 °C to +60 °C
Humidity
90%, non-condensing
Other:
Size (LxWxH)
176x118x122 mm
Many parameters of the power supply can be taylored to your needs. Some of them are listed below:
- output voltage incl. non-standard
- optimization for complete discharge, partial discharge or other custom regime
- reduced or bursted output power
- interfaces (calibraton, logic)
- type and location of connectors
- cables
- coverage case
Partial discharge modifications
Maximal output voltage 300V
Partial discharge modification
Maximal output voltage 500V
Partial discharge modification
Maximal output voltage 700V
Partial discharge modification
Maximal output voltage 1000V
Partial discharge modification
Maximal output voltage 1500V
Partial discharge modification
(*) Other output voltages are available on request
Complete discharge modifications
Maximal output voltage 300V
Complete discharge modification
Maximal output voltage 500V
Complete discharge modification
Maximal output voltage 700V
Complete discharge modification
Maximal output voltage 1000V
Complete discharge modification
Maximal output voltage 1500V
Complete discharge modification
(*) Other output voltages are available on request
Example
Maximal output voltage 500V
Partial discharge modification
Русский